Home/Wastewater treatment

Wastewater treatment

Tertiary Wastewater Treatment

Polishing of secondary-treated wastewater for a defined reuse or discharge objective.

Request technical proposal

Conceptual modular wastewater treatment equipment arrangement — Wastewater equipment family — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Effluent treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Filtration & conditioning route

Download SVG

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

Disinfection, media and conditioning are selected from the required water quality.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How tertiary wastewater treatment fits your process.

Operating principle

Polishing of secondary-treated wastewater for a defined reuse or discharge objective.

Tertiary treatment polishes upstream treated wastewater for a defined final use. Solids removal, membranes, adsorption or disinfection are selected from residual water quality and the reuse specification.

Engineering checks

Service flow and selected hydraulic loading
Bed depth, contact time and freeboard
Backwash expansion or regeneration demand
Design pressure, materials and corrosion compatibility

Configuration & equipment

Upstream treated-water interface
Selected solids-removal stage
Adsorption / membrane stage where required
Disinfection where required
Reuse-water storage and transfer
Water-quality monitoring

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	Disinfection, media and conditioning are selected from the required water quality.
Operating and maintenance	Record inlet/outlet pressure and water quality. Inspect media loss and distribution. Carry out backwash or regeneration to approved procedures.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Tertiary Wastewater Treatment 2D functional arrangement

Tertiary Wastewater Treatment component decomposition reference — Tertiary Wastewater Treatment — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

Upstream treated-water interface
Selected solids-removal stage
Adsorption / membrane stage where required
Disinfection where required
Reuse-water storage and transfer
Water-quality monitoring

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Industry type, effluent flow and operating hours, pH, COD, BOD, TSS, TDS, oil & grease, colour/metals/specific contaminants, equalization pattern, reuse/discharge target and treatability data.

Average/peak flowpollutant mass loadsequalization volumereaction HRTclarifier loadingsludge generation basistertiary dutychemical test requirements

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Sewage Treatment Plant – MBBRSewage Treatment Plant – SBRSewage Treatment Plant – ASPTertiary Wastewater TreatmentEqualization Tank

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Polishing of secondary-treated wastewater for a defined reuse or discharge objective. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

Average daily flow and hourly inflow profile
Operating hours and peak-flow conditions
BOD, COD, TSS, pH, nutrients and relevant contaminants
Reuse or discharge objective
Available area, levels and site interfaces
Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Food & Beverage Hospitals & Healthcare Residential & Commercial Buildings Townships & Housing Societies Municipal / Infrastructure Recycling / Waste Processing

Tertiary Wastewater Treatment

See the equipment. Understand the process.