Bakrol, Ahmedabad, India+91 97277 86892

Wastewater treatment

Sewage Treatment Plant – MBBR

Biofilm-based sewage treatment using moving carriers within an aerated biological reactor.

Conceptual modular wastewater treatment installation with treatment tanks and service access
Modular wastewater plant — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Sewage treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

MBBR sewage treatment

Download SVG
Screening & equalization → Anoxic zone if required → MBBR aerobic zone → Solids separation → Tertiary treatment & disinfection
Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes
  • Anoxic treatment and internal recycle are included where the nitrogen-removal design requires them.
  • Treated water proceeds to storage for the agreed reuse or discharge route.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How sewage treatment plant – mbbr fits your process.

Operating principle

Biofilm-based sewage treatment using moving carriers within an aerated biological reactor.

Biological treatment uses a controlled microbial process to reduce biodegradable pollution. MBBR, MBR, SBR and ASP use different biomass-retention and solids-separation arrangements.

Engineering checks

  • Inflow profile, BOD, COD, TSS and nutrients
  • Biodegradability and inhibition risks
  • Hydraulic and organic loading
  • Oxygen transfer, solids handling and reuse objective

Configuration & equipment

  1. Inlet screening and equalization interface
  2. Selected biological reactor
  3. Aeration and mixing equipment
  4. Biomass retention / separation stage
  5. Sludge withdrawal and handling
  6. Treated-water polishing as required
  7. Monitoring, controls and sampling

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating itemEngineering requirement
Process review 1Anoxic treatment and internal recycle are included where the nitrogen-removal design requires them.
Process review 2Treated water proceeds to storage for the agreed reuse or discharge route.
Operating and maintenanceTrend process water quality and biomass condition. Inspect aeration distribution and mechanical equipment. Maintain a defined sludge-wasting and sampling routine.
DocumentationProject-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Sewage Treatment Plant – MBBR 2D functional arrangement
MBBR reactor assembly reference — illustrative exploded 3D view
MBBR reactor assembly reference

EXPLODED VIEW

Understand the assembly.

  1. Inlet screening and equalization interface
  2. Selected biological reactor
  3. Aeration and mixing equipment
  4. Biomass retention / separation stage
  5. Sludge withdrawal and handling
  6. Treated-water polishing as required
  7. Monitoring, controls and sampling

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Daily sewage flow, operating pattern, population/source, BOD/COD/TSS, oil & grease if relevant, nitrogen targets, reuse/discharge objective, footprint, odour/noise and automation constraints.

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Equipment & execution preferences

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Biofilm-based sewage treatment using moving carriers within an aerated biological reactor. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

  • Average daily flow and hourly inflow profile
  • Operating hours and peak-flow conditions
  • BOD, COD, TSS, pH, nutrients and relevant contaminants
  • Reuse or discharge objective
  • Available area, levels and site interfaces
  • Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.