Home/Wastewater treatment

Wastewater treatment

Packaged STP

A packaged sewage-treatment arrangement developed around site and operating requirements.

Request technical proposal

Conceptual modular wastewater treatment installation with treatment tanks and service access — Modular wastewater plant — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Sewage treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Packaged STP — example MBBR route

Download SVG

Screening & equalization → Anoxic zone if required → MBBR aerobic zone → Solids separation → Tertiary treatment & disinfection

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

MBBR is one candidate packaged treatment route. Configuration follows the approved hydraulic and biological design.
Anoxic treatment and internal recycle are included where the nitrogen-removal design requires them.
Treated water proceeds to storage for the agreed reuse or discharge route.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How packaged stp fits your process.

Operating principle

A packaged sewage-treatment arrangement developed around site and operating requirements.

Biological treatment uses a controlled microbial process to reduce biodegradable pollution. MBBR, MBR, SBR and ASP use different biomass-retention and solids-separation arrangements.

Engineering checks

Inflow profile, BOD, COD, TSS and nutrients
Biodegradability and inhibition risks
Hydraulic and organic loading
Oxygen transfer, solids handling and reuse objective

Configuration & equipment

Inlet screening and equalization interface
Selected biological reactor
Aeration and mixing equipment
Biomass retention / separation stage
Sludge withdrawal and handling
Treated-water polishing as required
Monitoring, controls and sampling

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	MBBR is one candidate packaged treatment route. Configuration follows the approved hydraulic and biological design.
Process review 2	Anoxic treatment and internal recycle are included where the nitrogen-removal design requires them.
Process review 3	Treated water proceeds to storage for the agreed reuse or discharge route.
Operating and maintenance	Trend process water quality and biomass condition. Inspect aeration distribution and mechanical equipment. Maintain a defined sludge-wasting and sampling routine.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

MBBR reactor assembly reference — illustrative exploded 3D view — MBBR reactor assembly reference

EXPLODED VIEW

Understand the assembly.

MBBR equipment-family illustration. ASP, SBR and MBR have different internals; this reference applies only where a carrier-media reactor is selected.

Inlet screening and equalization interface
Selected biological reactor
Aeration and mixing equipment
Biomass retention / separation stage
Sludge withdrawal and handling
Treated-water polishing as required
Monitoring, controls and sampling

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Daily sewage flow, operating pattern, population/source, BOD/COD/TSS, oil & grease if relevant, nitrogen targets, reuse/discharge objective, footprint, odour/noise and automation constraints.

Average flowpeak factorpeak floworganic loadHRTreactor volumerecirculationoxygen demandsludge handlingtertiary/disinfection duty

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Sewage Treatment Plant – MBBRSewage Treatment Plant – MBRPackaged STPGreywater Recycling PlantTertiary Wastewater Treatment

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

A packaged sewage-treatment arrangement developed around site and operating requirements. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

Average daily flow and hourly inflow profile
Operating hours and peak-flow conditions
BOD, COD, TSS, pH, nutrients and relevant contaminants
Reuse or discharge objective
Available area, levels and site interfaces
Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Residential & Commercial Buildings Educational Institutions

Packaged STP

See the equipment. Understand the process.