Home/Water treatment

Water treatment

Ultrafiltration (UF) Plant

Membrane filtration for suspended solids and pretreatment or tertiary polishing duties.

Request technical proposal

3D render of vertical ultrafiltration modules, pump and pipework on a steel skid — UF membrane skid — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Ultrafiltration equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Ultrafiltration process

Download SVG

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

Backwash, air scour and chemical cleaning follow the selected membrane system.
Residual streams require collection and an agreed handling route.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How ultrafiltration (uf) plant fits your process.

Operating principle

Membrane filtration for suspended solids and pretreatment or tertiary polishing duties.

A membrane barrier separates suspended matter from the filtrate. Forward filtration, backwash and chemically enhanced cleaning must be evaluated together to establish net production.

Engineering checks

Feed turbidity, organics and fouling behaviour
Net flux after cleaning and downtime
Backwash supply and waste handling
Module integrity and vendor operating envelope

Configuration & equipment

Feed pump and protective screen
UF membrane modules
Feed and filtrate headers
Backwash system
Air-scour connections where applicable
Chemical-cleaning circuit
Flow and transmembrane-pressure instruments

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	Backwash, air scour and chemical cleaning follow the selected membrane system.
Process review 2	Residual streams require collection and an agreed handling route.
Operating and maintenance	Trend transmembrane pressure. Follow approved backwash and cleaning cycles. Perform membrane integrity checks.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Ultrafiltration (UF) Plant 2D functional arrangement

Ultrafiltration (UF) Plant component decomposition reference — Ultrafiltration (UF) Plant — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

Feed pump and protective screen
UF membrane modules
Feed and filtrate headers
Backwash system
Air-scour connections where applicable
Chemical-cleaning circuit
Flow and transmembrane-pressure instruments

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Required flow, operating hours, feed source, full water analysis, temperature, target product quality, recovery target, pretreatment, cleaning philosophy, automation, MOC and utility constraints.

Flowfeed TDS/conductivityhardnessalkalinitysilicaFe/MnSDI/turbidity where relevantpHtemperaturechlorinetarget TDS/conductivityoperating hours

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Ultrafiltration (UF) PlantWater Softener PlantGreywater Recycling PlantCombined Physico-Chemical + Biological ETPBar Screen / Screen Chamber

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Membrane filtration for suspended solids and pretreatment or tertiary polishing duties. The process train is selected from feed-water analysis and the final water specification. Pretreatment protects downstream treatment, while monitoring and cleaning provisions support reliable operation.

What we review

Required product flow and operating hours
Water source and complete laboratory analysis
Feed temperature, pH and fouling indicators
Target water quality and intended use
Utility availability and plant footprint
Pretreatment and cleaning requirements

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Textile Dyeing & Printing Electronics & High-Purity Manufacturing Laundry & Commercial Washing

Ultrafiltration (UF) Plant

See the equipment. Understand the process.