Home/Wastewater treatment

Wastewater treatment

Physico-Chemical ETP

Chemical conditioning and physical separation selected from effluent analysis and treatability testing.

Request technical proposal

Conceptual modular wastewater treatment equipment arrangement — Wastewater equipment family — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Effluent treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Physico-chemical treatment

Download SVG

Stream segregation & equalization → pH correction & rapid mixing → Flocculation → Solids separation → Further treatment or final route

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

Chemical selection, pH and doses require treatability or jar tests.
The outlet requires evaluation against the final treatment objective.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How physico-chemical etp fits your process.

Operating principle

Chemical conditioning and physical separation selected from effluent analysis and treatability testing.

Physical and chemical treatment is selected from segregated effluent analysis and treatability tests. Depending on the contaminants, the train may include controlled chemical reaction, coagulation, flocculation, solids separation and polishing.

Engineering checks

Stream-specific chemistry and incompatible constituents
Laboratory / jar-test basis for reaction and dose
Hydraulic loading and solid-liquid separation tests
Sludge characterization and downstream polishing

Configuration & equipment

Stream segregation and equalization
Controlled reaction / neutralization stages
Chemical preparation and metering
Rapid mixing and flocculation where required
Settling or flotation selected by testing
Sludge collection and dewatering
Sampling and process controls

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	Chemical selection, pH and doses require treatability or jar tests.
Process review 2	The outlet requires evaluation against the final treatment objective.
Operating and maintenance	Inspect alignment and vibration. Check lubrication and fasteners. Inspect shaft, impeller and supports.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Physico-Chemical ETP 2D functional arrangement

Physico-Chemical ETP component decomposition reference — Physico-Chemical ETP — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

Stream segregation and equalization
Controlled reaction / neutralization stages
Chemical preparation and metering
Rapid mixing and flocculation where required
Settling or flotation selected by testing
Sludge collection and dewatering
Sampling and process controls

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Industry type, effluent flow and operating hours, pH, COD, BOD, TSS, TDS, oil & grease, colour/metals/specific contaminants, equalization pattern, reuse/discharge target and treatability data.

Average/peak flowpollutant mass loadsequalization volumereaction HRTclarifier loadingsludge generation basistertiary dutychemical test requirements

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Chemical Dosing SkidPhysico-Chemical ETPNeutralization TankIntegrated ZLD PlantChemical Storage Tank

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Chemical conditioning and physical separation selected from effluent analysis and treatability testing. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

Average daily flow and hourly inflow profile
Operating hours and peak-flow conditions
BOD, COD, TSS, pH, nutrients and relevant contaminants
Reuse or discharge objective
Available area, levels and site interfaces
Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Chemical & Petrochemical Hospitals & Healthcare Automotive & Engineering Paints, Pigments & Coatings Recycling / Waste Processing

Physico-Chemical ETP

See the equipment. Understand the process.