Bakrol, Ahmedabad, India+91 97277 86892
Enquire
Home/Wastewater treatment

Wastewater treatment

Oily Wastewater Treatment

Separation and treatment selected around free, dispersed and emulsified oil characteristics.

Request technical proposal
Conceptual modular wastewater treatment equipment arrangement
Wastewater equipment family — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Effluent treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Preliminary separation

Download SVG
Incoming wastewater → Flow distribution → Oil / grease separation → Effluent collection → Further treatment
Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes
  • Removal efficiency and residual handling depend on the contaminant form and the selected separation process.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How oily wastewater treatment fits your process.

Operating principle

Separation and treatment selected around free, dispersed and emulsified oil characteristics.

Fine air bubbles attach to suitable suspended material and float it to the surface. Coagulation and flocculation may be required based on treatability tests.

Engineering checks

  • Jar / flotation test results
  • Solids load and required separation area
  • Recycle flow and air-release conditions
  • Float-handling and chemical requirements

Configuration & equipment

  1. Conditioned feed inlet
  2. Recycle pressurization pump
  3. Air-dissolution / saturation system
  4. Flotation separation tank
  5. Float collection mechanism
  6. Clarified outlet and sludge discharge

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating itemEngineering requirement
Process review 1Removal efficiency and residual handling depend on the contaminant form and the selected separation process.
Operating and maintenanceInspect air release and recycle pressure. Clean float collection equipment. Trend treated-water quality and float consistency.
DocumentationProject-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Oily Wastewater Treatment 2D functional arrangement

Reference drawings are not to scale. Project dimensions, equipment duty, pipe sizes and materials are specified after design review.

Download 2D SVG
Oily Wastewater Treatment component decomposition reference
Oily Wastewater Treatment — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

  1. Conditioned feed inlet
  2. Recycle pressurization pump
  3. Air-dissolution / saturation system
  4. Flotation separation tank
  5. Float collection mechanism
  6. Clarified outlet and sludge discharge
Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Industry type, effluent flow and operating hours, pH, COD, BOD, TSS, TDS, oil & grease, colour/metals/specific contaminants, equalization pattern, reuse/discharge target and treatability data.

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Equipment & execution preferences

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Separation and treatment selected around free, dispersed and emulsified oil characteristics. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

  • Average daily flow and hourly inflow profile
  • Operating hours and peak-flow conditions
  • BOD, COD, TSS, pH, nutrients and relevant contaminants
  • Reuse or discharge objective
  • Available area, levels and site interfaces
  • Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Automotive & EngineeringOil & Gas / Oily Wastewater

EXPLORE FURTHER

Related solutions

Conceptual modular wastewater treatment equipment arrangement3D system family

Lamella Clarifier

Inclined-plate clarification selected around settleability and projected surface loading.

Explore
Conceptual modular wastewater treatment equipment arrangement3D system family

Tube Settler Clarifier

Tube-settler clarification for suitable suspended-solids separation duties.

Explore
Conceptual modular wastewater treatment equipment arrangement3D system family

Dissolved Air Flotation (DAF)

Flotation treatment for suitable suspended solids, fats and floatable contaminants.

Explore