Bakrol, Ahmedabad, India+91 97277 86892
Enquire
Home/Water treatment

Water treatment

Demineralization (DM) Plant

Ion-exchange treatment for reducing dissolved ionic content in water.

Request technical proposal
Conceptual 3D equipment render of Demineralization (DM) Plant
Demineralization (DM) Plant — conceptual 3D equipment render. Final configuration follows the approved project design.

3D EQUIPMENT VIEW

Demineralization (DM) Plant

Explore the equipment arrangement, then read how the system works and review its technical drawings.

Description & drawings Browse equipment renders

Conceptual equipment render. Final dimensions and configuration follow the approved project design.

PRODUCT DESCRIPTION & TECHNICAL DOCUMENTS

How demineralization (dm) plant fits your process.

Operating principle

Ion-exchange treatment for reducing dissolved ionic content in water.

Water passes through a selected media or resin bed. Separation, adsorption or ion exchange depends on the media duty; backwash or regeneration restores the relevant operating condition.

Engineering checks

  • Service flow and selected hydraulic loading
  • Bed depth, contact time and freeboard
  • Backwash expansion or regeneration demand
  • Design pressure, materials and corrosion compatibility

Configuration & equipment

  1. Vessel shell and access closure
  2. Inlet distributor
  3. Selected media or resin bed
  4. Supporting layer where specified
  5. Underdrain / collection system
  6. Service and backwash valve manifold
  7. Drain and sampling connections

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating itemEngineering requirement
Process review 1Degassing and polishing are selected for the feed chemistry and product-water quality.
Process review 2Acid and alkali regeneration effluents require neutralization and controlled handling.
Operating and maintenanceRecord inlet/outlet pressure and water quality. Inspect media loss and distribution. Carry out backwash or regeneration to approved procedures.
DocumentationProject-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

PDF & DRAWING DOWNLOADS

Keep the technical references.

Read the water treatment & ro brochure, or download the process and arrangement drawings below.

Open brochure (PDF) Download PDFProcess drawing ↓Equipment drawing ↓

PROCESS FLOW DIAGRAM

Ion-exchange demineralization

Download drawing (SVG)
Conditioned feed water → Cation exchanger → Degassing if required → Anion exchanger → DM-water collection
Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes
  • Degassing and polishing are selected for the feed chemistry and product-water quality.
  • Acid and alkali regeneration effluents require neutralization and controlled handling.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Demineralization (DM) Plant 2D functional arrangement

Reference drawings are not to scale. Project dimensions, equipment duty, pipe sizes and materials are specified after design review.

Download 2D SVG
Demineralization (DM) Plant component decomposition reference
Demineralization (DM) Plant — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

  1. Vessel shell and access closure
  2. Inlet distributor
  3. Selected media or resin bed
  4. Supporting layer where specified
  5. Underdrain / collection system
  6. Service and backwash valve manifold
  7. Drain and sampling connections
Open calculation software Return to catalogue

EXPLORE YOUR DESIGN BASIS

See how operating hours change energy use.

Enter the total running electrical load for this equipment or plant, then adjust its daily running hours.

Illustrative arithmetic using your inputs. These values are not measured plant results or a performance promise.

Daily electricity
80.00 kWh/day
30-day electricity
2400.00 kWh

Energy = electrical kW × running hours. Constant running load; standby load, starting transients and tariff charges are excluded.

Open detailed calculator →

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Required flow, operating hours, feed source, full water analysis, temperature, target product quality, recovery target, pretreatment, cleaning philosophy, automation, MOC and utility constraints.

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Equipment & execution preferences

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Ion-exchange treatment for reducing dissolved ionic content in water. The process train is selected from feed-water analysis and the final water specification. Pretreatment protects downstream treatment, while monitoring and cleaning provisions support reliable operation.

What we review

  • Flow and service hours per cycle
  • Full ionic analysis and hardness as CaCO₃
  • Required treated-water quality
  • Resin working capacity and regeneration duty
  • Chemical storage and regeneration drainage
  • Operating pressure and material compatibility

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Pharmaceutical & Life SciencesPower & Boiler Utilities

EXPLORE FURTHER

Related solutions

3D render of a skid-mounted reverse osmosis system with membrane housings, pump and cartridge filterConceptual 3D render

Industrial RO Plant

Pressure-driven membrane treatment to reduce dissolved salts in industrial process water.

Explore
Conceptual 3D equipment render of Two-Pass RO SystemConceptual 3D render

Two-Pass RO System

Two sequential RO passes for applications requiring further polishing of first-pass permeate.

Explore
Conceptual 3D equipment render of High-TDS RO PlantConceptual 3D render

High-TDS RO Plant

RO treatment developed around elevated salinity, scaling limits and feed-water chemistry.

Explore