Bakrol, Ahmedabad, India+91 97277 86892
Enquire
Home/Wastewater treatment

Wastewater treatment

Common Effluent Treatment Plant (CETP)

Combined treatment developed around the characteristics and variability of contributing effluents.

Request technical proposal
Conceptual modular wastewater treatment equipment arrangement
Wastewater equipment family — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Effluent treatment equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Combined industrial effluent treatment

Download SVG
Stream segregation & equalization → pH correction & coagulation → Flocculation & clarification → Biological treatment → Polishing & final use
Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes
  • This is an indicative route for amenable effluent; treatability establishes the final process.
  • Biological treatment requires a suitable feed and a defined solids-separation stage.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How common effluent treatment plant (cetp) fits your process.

Operating principle

Combined treatment developed around the characteristics and variability of contributing effluents.

Biological treatment uses a controlled microbial process to reduce biodegradable pollution. MBBR, MBR, SBR and ASP use different biomass-retention and solids-separation arrangements.

Engineering checks

  • Inflow profile, BOD, COD, TSS and nutrients
  • Biodegradability and inhibition risks
  • Hydraulic and organic loading
  • Oxygen transfer, solids handling and reuse objective

Configuration & equipment

  1. Inlet screening and equalization interface
  2. Selected biological reactor
  3. Aeration and mixing equipment
  4. Biomass retention / separation stage
  5. Sludge withdrawal and handling
  6. Treated-water polishing as required
  7. Monitoring, controls and sampling

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating itemEngineering requirement
Process review 1This is an indicative route for amenable effluent; treatability establishes the final process.
Process review 2Biological treatment requires a suitable feed and a defined solids-separation stage.
Operating and maintenanceTrend process water quality and biomass condition. Inspect aeration distribution and mechanical equipment. Maintain a defined sludge-wasting and sampling routine.
DocumentationProject-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Common Effluent Treatment Plant (CETP) 2D functional arrangement

Reference drawings are not to scale. Project dimensions, equipment duty, pipe sizes and materials are specified after design review.

Download 2D SVG
Common Effluent Treatment Plant (CETP) component decomposition reference
Common Effluent Treatment Plant (CETP) — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

  1. Inlet screening and equalization interface
  2. Selected biological reactor
  3. Aeration and mixing equipment
  4. Biomass retention / separation stage
  5. Sludge withdrawal and handling
  6. Treated-water polishing as required
  7. Monitoring, controls and sampling
Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Industry type, effluent flow and operating hours, pH, COD, BOD, TSS, TDS, oil & grease, colour/metals/specific contaminants, equalization pattern, reuse/discharge target and treatability data.

Equipment & execution preferences

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Combined treatment developed around the characteristics and variability of contributing effluents. Treatment begins with understanding the effluent sources and their variability. Physical, chemical and biological stages are combined as appropriate, followed by polishing and sludge management.

What we review

  • Average daily flow and hourly inflow profile
  • Operating hours and peak-flow conditions
  • BOD, COD, TSS, pH, nutrients and relevant contaminants
  • Reuse or discharge objective
  • Available area, levels and site interfaces
  • Treatability, sludge handling and odour constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Chemical & PetrochemicalAutomotive & EngineeringPower & Boiler Utilities

EXPLORE FURTHER

Related solutions

Conceptual modular wastewater treatment equipment arrangement3D system family

Lamella Clarifier

Inclined-plate clarification selected around settleability and projected surface loading.

Explore
Conceptual modular wastewater treatment equipment arrangement3D system family

Tube Settler Clarifier

Tube-settler clarification for suitable suspended-solids separation duties.

Explore
Conceptual modular wastewater treatment equipment arrangement3D system family

Dissolved Air Flotation (DAF)

Flotation treatment for suitable suspended solids, fats and floatable contaminants.

Explore