Home/Water treatment

Water treatment

Two-Pass RO System

Two sequential RO passes for applications requiring further polishing of first-pass permeate.

Request technical proposal

3D render of a skid-mounted reverse osmosis system with membrane housings, pump and cartridge filter — Industrial RO system — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Reverse osmosis equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Two-pass reverse osmosis

Download SVG

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

Pass 1 permeate feeds pass 2. Interstage conditioning depends on the final water specification.
Each pass has a concentrate outlet; any recycle is assessed separately.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How two-pass ro system fits your process.

Operating principle

Two sequential RO passes for applications requiring further polishing of first-pass permeate.

Pressure drives water through a semipermeable membrane. The feed separates into permeate and a concentrate stream; recovery and membrane arrangement are established from water chemistry and a membrane projection.

Engineering checks

Feed ionic analysis, temperature, SDI and turbidity
Scaling potential at proposed recovery
Element flux, crossflow and pressure limits
Permeate quality and concentrate-management route

Configuration & equipment

Feed conditioning and cartridge filtration
High-pressure feed pump
Membrane pressure housings
Spiral-wound membrane elements
Permeate and concentrate manifolds
Pressure, conductivity and flow instruments
Cleaning connections and control panel

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	Pass 1 permeate feeds pass 2. Interstage conditioning depends on the final water specification.
Process review 2	Each pass has a concentrate outlet; any recycle is assessed separately.
Operating and maintenance	Trend normalized permeate flow and salt passage. Inspect differential pressure and cartridge loading. Use approved cleaning chemistry and membrane preservation.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Two-Pass RO System 2D functional arrangement

Membrane pressure-housing assembly — illustrative exploded 3D view — Membrane pressure-housing assembly

EXPLODED VIEW

Understand the assembly.

Illustrative spiral-wound membrane assembly. Element count, closure design and connections depend on the selected housing.

Feed conditioning and cartridge filtration
High-pressure feed pump
Membrane pressure housings
Spiral-wound membrane elements
Permeate and concentrate manifolds
Pressure, conductivity and flow instruments
Cleaning connections and control panel

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Required flow, operating hours, feed source, full water analysis, temperature, target product quality, recovery target, pretreatment, cleaning philosophy, automation, MOC and utility constraints.

Flowfeed TDS/conductivityhardnessalkalinitysilicaFe/MnSDI/turbidity where relevantpHtemperaturechlorinetarget TDS/conductivityoperating hours

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Two-Pass RO SystemElectrodeionization (EDI) SystemDemineralization (DM) PlantPharma ETPIntegrated ZLD Plant

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Two sequential RO passes for applications requiring further polishing of first-pass permeate. The process train is selected from feed-water analysis and the final water specification. Pretreatment protects downstream treatment, while monitoring and cleaning provisions support reliable operation.

What we review

Required product flow and operating hours
Water source and complete laboratory analysis
Feed temperature, pH and fouling indicators
Target water quality and intended use
Utility availability and plant footprint
Pretreatment and cleaning requirements

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Pharmaceutical & Life Sciences Electronics & High-Purity Manufacturing

Two-Pass RO System

See the equipment. Understand the process.