Home/Filtration & dosing

Filtration & dosing

Chemical Dosing System

Metered chemical addition for project-specific conditioning and treatment requirements.

Request technical proposal

3D render of water treatment vessels and organized skid piping — Treatment-vessel arrangement — conceptual 3D render

SYSTEM VIEW

See the equipment.
Understand the process.

The render illustrates the Softening & media filtration equipment family. Your final arrangement follows the project duty, site layout and approved design.

View process flow Browse the visual gallery

Conceptual 3D visualization · equipment details are illustrative.

PROCESS FLOW DIAGRAM

Chemical dosing arrangement

Download SVG

Chemical storage → Preparation / dilution → Dosing pump → Injection point → Process mixing or contact

Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes

Chemical compatibility, calibration, containment and safety accessories require detailed design.
Dosing control follows the process requirement and verified chemical strength.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

PROCESS & EQUIPMENT DETAILS

How chemical dosing system fits your process.

Operating principle

Metered chemical addition for project-specific conditioning and treatment requirements.

A metering system introduces an approved chemical dose into the process. Solution strength, required dose and operating flow determine the dosing-pump duty.

Engineering checks

Approved chemical dose and concentration
Chemical compatibility and bund containment
Pump turndown and injection pressure
Flow-paced or feedback control philosophy

Configuration & equipment

Chemical storage / day tank
Suction line and isolation
Metering pump
Relief and back-pressure provisions
Injection quill and non-return valve
Calibration and control interface

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating item	Engineering requirement
Process review 1	Chemical compatibility, calibration, containment and safety accessories require detailed design.
Process review 2	Dosing control follows the process requirement and verified chemical strength.
Operating and maintenance	Calibrate delivered dosing volume. Inspect tubing, valves and injection points. Follow chemical handling and flushing procedures.
Documentation	Project-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Chemical Dosing System 2D functional arrangement

Chemical Dosing System component decomposition reference — Chemical Dosing System — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

Chemical storage / day tank
Suction line and isolation
Metering pump
Relief and back-pressure provisions
Injection quill and non-return valve
Calibration and control interface

Open calculation software Return to catalogue

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Flow, water quality, target microorganism/oxidation duty, UV transmittance or oxidant demand where applicable, contact time, residual target, safety and automation.

Dose inputsolution strengthdosing flowcontact volumeUV/ozone vendor selectioninterlocksresidual monitoringbypass philosophy

Water source / process stream and intended final use

Technologies you would like to discuss

Select candidates for review. This does not establish a treatment sequence.

Chemical Dosing SystemDissolved Air Flotation (DAF)Physico-Chemical ETPFilter PressEqualization Tank

Equipment & execution preferences

Wetted vessels / tanks — preferred materialProcess piping — preferred materialSkid / structural frame — preferred materialSeals / gaskets — preferred materialAutomation preferenceDuty / standby arrangementInstallation preferencePreferred equipment makes

Location, utilities, access & scope notes

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Metered chemical addition for project-specific conditioning and treatment requirements. Equipment is selected from the treatment objective, flow profile and fluid characteristics. Media, contact conditions and maintenance provisions are reviewed for the actual duty.

What we review

Design flow and operating hours
Feed solids, particle characteristics and water analysis
Required separation or conditioning duty
Operating pressure and temperature
Cleaning, backwash or replacement requirements
Chemical compatibility and utility constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Electroplating & Metal Finishing Paints, Pigments & Coatings

Chemical Dosing System

See the equipment. Understand the process.