Bakrol, Ahmedabad, India+91 97277 86892
Enquire
Home/Filtration & dosing

Filtration & dosing

Chemical Dosing Skid

Integrated chemical storage and metering skid for a defined process duty.

Request technical proposal
Conceptual 3D equipment render of Chemical Dosing Skid
Chemical Dosing Skid — conceptual 3D equipment render. Final configuration follows the approved project design.

3D EQUIPMENT VIEW

Chemical Dosing Skid

Explore the equipment arrangement, then read how the system works and review its technical drawings.

Description & drawings Browse equipment renders

Conceptual equipment render. Final dimensions and configuration follow the approved project design.

PRODUCT DESCRIPTION & TECHNICAL DOCUMENTS

How chemical dosing skid fits your process.

Operating principle

Integrated chemical storage and metering skid for a defined process duty.

A metering system introduces an approved chemical dose into the process. Solution strength, required dose and operating flow determine the dosing-pump duty.

Engineering checks

  • Approved chemical dose and concentration
  • Chemical compatibility and bund containment
  • Pump turndown and injection pressure
  • Flow-paced or feedback control philosophy

Configuration & equipment

  1. Chemical storage / day tank
  2. Suction line and isolation
  3. Metering pump
  4. Relief and back-pressure provisions
  5. Injection quill and non-return valve
  6. Calibration and control interface

Configuration options are reviewed against the project duty. Supply quantities and final scope are defined in the approved proposal.

Process / operating itemEngineering requirement
Process review 1Chemical compatibility, calibration, containment and safety accessories require detailed design.
Process review 2Dosing control follows the process requirement and verified chemical strength.
Operating and maintenanceCalibrate delivered dosing volume. Inspect tubing, valves and injection points. Follow chemical handling and flushing procedures.
DocumentationProject-specific datasheet, PFD, P&ID, equipment GA, electrical load list and O&M documentation as agreed.

PDF & DRAWING DOWNLOADS

Keep the technical references.

Read the water treatment & ro brochure, or download the process and arrangement drawings below.

Open brochure (PDF) Download PDFProcess drawing ↓Equipment drawing ↓

PROCESS FLOW DIAGRAM

Chemical dosing arrangement

Download drawing (SVG)
Chemical storage → Preparation / dilution → Dosing pump → Injection point → Process mixing or contact
Main process Utility / chemical Residual stream Recovery / recycle

Swipe the diagram to view every stage.

Design notes
  • Chemical compatibility, calibration, containment and safety accessories require detailed design.
  • Dosing control follows the process requirement and verified chemical strength.

Indicative process overview. Equipment tags identify functional blocks only. Final PFDs, P&IDs, duties, sizes, valves and instruments are developed from the approved project design basis.

EQUIPMENT DRAWINGS

2D layout & exploded component views.

Review the functional arrangement and the components that make up the equipment.

Chemical Dosing Skid 2D functional arrangement

Reference drawings are not to scale. Project dimensions, equipment duty, pipe sizes and materials are specified after design review.

Download 2D SVG
Chemical Dosing Skid component decomposition reference
Chemical Dosing Skid — component decomposition

EXPLODED VIEW

Understand the assembly.

The separated component schematic identifies the main equipment groups. Vendor-specific internal geometry is established during detailed engineering.

  1. Chemical storage / day tank
  2. Suction line and isolation
  3. Metering pump
  4. Relief and back-pressure provisions
  5. Injection quill and non-return valve
  6. Calibration and control interface
Open calculation software Return to catalogue

EXPLORE YOUR DESIGN BASIS

See how operating hours change energy use.

Enter the total running electrical load for this equipment or plant, then adjust its daily running hours.

Illustrative arithmetic using your inputs. These values are not measured plant results or a performance promise.

Daily electricity
80.00 kWh/day
30-day electricity
2400.00 kWh

Energy = electrical kW × running hours. Constant running load; standby load, starting transients and tariff charges are excluded.

Open detailed calculator →

YOUR PROJECT, YOUR DESIGN BASIS

Configure your requirement.

Enter what you know. Leave unavailable values blank for engineering review.

Process inputs

Equipment type, gross/working volume, geometry, dimensions, design pressure/vacuum, temperature, fluid density/corrosivity, MOC, corrosion allowance, lining, supports, nozzles and design code.

Equipment & execution preferences

Materials are reviewed separately for each component against the fluid chemistry, temperature and service conditions. Preferences are subject to technical suitability and the agreed proposal.

No details are sent until you choose a sending channel.

A solution shaped by your requirements.

Integrated chemical storage and metering skid for a defined process duty. Equipment is selected from the treatment objective, flow profile and fluid characteristics. Media, contact conditions and maintenance provisions are reviewed for the actual duty.

What we review

  • Design flow and operating hours
  • Feed solids, particle characteristics and water analysis
  • Required separation or conditioning duty
  • Operating pressure and temperature
  • Cleaning, backwash or replacement requirements
  • Chemical compatibility and utility constraints

Capacity, materials, operating conditions and performance are specified after review of your project data. Product images are conceptual visualizations.

From design to operation

Our scope can cover process and mechanical engineering, manufacturing, supply, installation, commissioning and ongoing support. The final proposal clearly defines supplier scope, client interfaces, optional items and exclusions.

APPLICATIONS

Connect equipment to your industry.

Review the application, data requirements and candidate treatment options.

Chemical & PetrochemicalOil & Gas / Oily Wastewater

EXPLORE FURTHER

Related solutions

Conceptual 3D equipment render of Water Softener PlantConceptual 3D render

Water Softener Plant

Ion-exchange softening for reduction of calcium and magnesium hardness.

Explore
Conceptual 3D equipment render of Pressure Sand Filter (PSF)Conceptual 3D render

Pressure Sand Filter (PSF)

Granular media filtration for suspended-solids removal and process pretreatment.

Explore
Conceptual 3D equipment render of Multigrade Filter (MGF)Conceptual 3D render

Multigrade Filter (MGF)

Graded-media filtration for water clarification and downstream equipment protection.

Explore